A fresh coat of paint will completely refresh and renew the appearance of your pool. It can also help prevent stains, scaling, and other surface flaws from reappearing.
Painting a pool can be a DIY project that’s easy and affordable. But it’s important to take the time to do it right.
Preparation
The surface of a swimming pool must be properly prepared before any paint is applied. Failure to do this can result in problems such as peeling and flaking, hairline cracks, splits, mould, discolouration, air bubbles, and warping.
The pool should be drained and cleaned thoroughly using muriatic, sulfamic acid, or TSP cleaners. Scrub the entire surface with a hard scrubbing brush, rinse, and remove the water.
A sanding job should be performed on the surface to prepare it for painting. Use 80-grit sandpaper.
Once the pool is ready for painting, it should dry for 3 – 5 days. The surface must be completely dry before applying any epoxy or rubber-based paints.
Before applying any paint, check that the surface is completely dry by attaching clear packing tape 2in x 5in on different areas of the surface of your pool the day before painting. If the tape has moisture, the surface needs additional drying time.
Primer
In Pool Painting Schaumburg IL, the key is selecting the right paint for your needs. For example, an epoxy coating may be the best option if you want to protect your bare concrete or plaster pool surface from harsh chemicals and UV rays.
However, before putting on a coat of paint, it is important to prime the surface so the coating can adhere properly. This will ensure that the paint lasts for years and remains aesthetically pleasing.
Coats
Choosing the right coating for your pool surface is important in any pool painting project. The right type of paint can create a big mess and lead to a good outcome.
Different types of swimming pool paint are available for use on concrete, plaster, fiberglass, and steel surfaces. Each is designed to provide a specific benefit and a different lifespan, depending on the surface.
Epoxy pool paints are the most durable, offering an average life expectancy of 6-8 years. These are also available in various colours and can be customized to match any decor.
Drying
Drying is an important part of any pool paint application. Failure to dry can cause uneven coverage, peeling, bubbling, air bubbles, and other surface problems.
If you have a fiberglass or concrete pool, you must drain the water completely before applying pool paints. This will prevent future deterioration due to leaks or other water issues.
After draining the pool, degrease the surface with TSP scrub, acid etch the plaster, and wash again with TSP before you paint.
Once the pool is clean and ready to be painted, it will take at least 3 – 5 days for pool paints to dry. Check the manufacturer’s instructions to determine the drying time for your specific paint.
To speed up the drying process, large direct fans over the pool ventilate it. It would help if you also taped off the pool to protect it from damage. This will save you the headache of having to re-tape the pool later.
