Sunday, May 22, 2022
HomeHow ToHow To Sharpen Nutribullet Blades A Step By Step Guide

How To Sharpen Nutribullet Blades A Step By Step Guide

Did you happen to buy the Nutribullet after the “healthy smoothie” trend started? or you’re looking that how to sharpen nutribullet blades.

The hype regarding smoothies and how it is beneficial has gained huge popularity. Now, people, many of them, brought Nutribullet to get on that trend.

The Nutribullet blender has been a popular one. However, many people who used Nutribullet complain about the blade becoming dull with time, even though the manufacturer says that the Nutribullet blade will never need sharpening because they made it from stainless steel.

Consumers have the chance of buying a replacement blade or sharpening it.

Are you one of those consumers facing such a problem with your Nutribullet blade? If you are, we have you covered. In this blog, we look to have the step by step guide on how to sharpen Nutribullet blades.

Before we go on to the steps, let us first look at whether the blades need sharpening or not.

Do Your Nutribullet Blades Need Sharpening?

Before you go rushing to sharpen your Nutrobullet blades, you have to understand a few things and ask yourself questions.

You need to understand Nutriliving states you do not ever require to sharpen your blades.

However, we believe there are some factors that you have to look at to see whether your blade needs sharpening or not. The three questions and factors you need to look at are:

  1. What do you blend using Nutribullet? The blade is bound to become dull with time if you blend dense, pulpy, or tough vegetables or fruits.
  2. How much do you use Nutribullet? The more you use the blade, the more possibility of its blades becoming dull.
  3. Are your smoothies coming out in the same consistency and quality like it was before?

Once you answer these three questions, you will know whether your blade needs sharpening or not.

You could even test the blade by simply feeling the cutting edge and determining how sharp or dull the blade is.

2 Steps on How To Sharpen Nutribullet

Let us give you the two steps on how you can sharpen Nutribullet.

Step 1: Take The Blade to Make it Accessible

The first step is to take the blade out without causing any obstruction to get access to it completely. If the blade does not get detached from its base, it cannot sharpen it easily.

Therefore, to remove the extractor blade, follow the below instructions:

  • Ensure you clean the blade and it’s free from any debris.
  • Use a towel too tightly and firmly get a grip of the blade in your hand.
  • Once you get a good grip of the blade, use pliers set to rotate clockwise the gear. The gear is the rotating black rubber part on the opposite end of the cup base. Rotating should unscrew the gear. It should come off easily.
  • You will see an orange washer. You remove it and ensure you safely store it.
  • Afterward, push the blade stem gently using your thumb. Do it slowly, and the blade will release from the base.
  • You can pull the blade out. The white washer you get, is stored in a safe place.

Safety note: Never remove the rubber seal because it is not needed.

Once you have safely taken the blade out, you can go to the second step.

Step 2: Sharpening the Blade

Now that you have established that you need to sharpen your Nutribullet blade and you have taken to blade out, you now need to sharpen it. For this, you need some sharpening stone or rod. I like to use Work Sharp GSS to sharpen knives and blades. You can use anything. Stick to basics and see how everything will get done easily.

To sharpen the blade, follow the instructions:

  1. Recognize the blade’s cutting edges. It is the part that blends or chops your veggies and fruits. In total, there are 6 cutting edges that you have to sharpen.
  2. Get the sharpening rod or plate and run it along the edge. You should do a total of 10 passes on each blade.
  3. Once you do that, run your finger on the edge, and instantly you will notice the difference.
  4. You do the second and third steps for all of the cutting edges.

Once you do these 4 steps, you have a sharpened Nutribullet blade. After sharpening the blades, rinse them in hot water and put them back onto the base cup.

Important Note: Do not make the blades sharper than they should be. You only want to increase the sharpness slightly. You would not want it so sharp that it can cut your finger!

Nutribullet Blade Is Sharp, But It Does Not Spin Or Blend?

If you happen to face a problem with your Nutribullet blade where it is sharp, but it does not spin or blend your fruits or veggies, then it has two causes behind it:

  • Something Stuck Between Blades

If your Nutribullet blade has hard or frozen food stuck in it, the blades can stop working. Therefore, unplug it from the electrical outlet, remove the blade, and clear any food built up.

  • Cup being Too Full

The Nutribullet blades can get stuck and prevent blending or cutting if the cup has too much food and liquid. Always stay within the ‘MAX’ line to avoid running into such a situation.

FAQs

Why does the Nutribullet blade get dull?

The Nutribullet blade gets dull when the blade gets used a lot. The edges become dull with time.

Can you sharpen the blades of a blender?

Yes, you can, and it is quite easy to do so. Any blender can get sharpened. You follow similar steps as above for your blender type.

Conclusion

We hope this blog helps you to sharpen your Nutribullet blades, and believe us, it’s easy, and anyone can do it easily! Always ensure the blades need sharpening before doing anything.

Nonetheless, if you are not sure or can’t figure it out, it will be better for you to buy a replacement blade. Comment below and let us know if this blog has been useful for you or if you have a better way to sharpen the Nutribullet blades.

ThriveVerge
ThriveVergehttps://thriveverge.com
The founder and CEO at ThriveVerge, The Verge, and Thrive Revolution. He launched Thriveverge in 2016, a leading behavior change technology, business, media, and entertainment company with the mission of ending the collective delusion that burning out is the price we have to pay for success.
RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular

- Advertisment -

Recent Comments